Online ordering on this site has disabled, and this site is archived as www1.parallax.com. Prices, promotions, and free shipping offers mentioned on this site are invalid. Please visit the new www.parallax.com for shopping!

High Speed Continuous Rotation Servo

  • 900-00025: High Speed Continuous Rotation Servo Overhead View
  • 900-00025: High Speed Continuous Rotation Servo
$16.99
Product ID: 900-00025
In Stock: 1,323
1-9$16.99
10-19$16.14
20+$15.29
Downloads

Overview

Parallax's High Speed Continuous Rotation Servo offers easily controlled bi-directional rotation via simple pulse-width modulation.  With about 3 times the RPM of the original Parallax Continuous Rotation Servo (900-00008), it makes an excellent drive motor for small, zippy robots.

Key Features:

  • Bidirectional continuous rotation, from 0 up to 180 RPM
  • Linear response to pulse-width modification for easy ramping
  • 6 to 8 VDC input range is compatible with 5-cell AA battery packs
  • Accepts four mounting screws, and fits easily into our small robot chassis
  • Access port for adjusting "idle" pulse width

Application Ideas:

  • Small zippy robots

Note: This servo was included with the original ActivityBot Robot Kit (#32500).  It is not compatible with the ActivityBot 360 Robot (#32600) which uses Feedback 360 High Speed servos featuring internal encoder sensors.

Details

  • Torque: 22 +/-11 oz-in (1.6 +/- 0.8 kg-cm) @ 7.4 V
  • Speed: 0.30 +/- 0.06 sec/360°
  • Weight: 1.5 oz (42 g)
  • Gear material: Acetal copolymer
  • Power requirements: 6.0 to 8.0 VDC; 15 mA idle, 130 +/- 50 mA full speed no load @ 7.4 V
  • Communication: pulse-width modulation, 1.3 to 1.7 ms high pulse, 20 ms intervals
  • Dimensions: 2.2 x 0.8 x 1.6 in (56 x 19 x 41 mm) excluding servo horn
  • Operating temperature: 14 to 113 °F (-10 to +45 °C)

Downloads & Documentation

Product Specific Downloads
Download Details More Info
Parallax Servo CAD File - 604.08 KB | updated: 19 May 2020 - 1:50 pm
High Speed Continuous Rotation Servo Guide - 141.94 KB | updated: 02 Mar 2015 - 3:45 pm